UT622A LCR Meter, Component Tester
| Quantity | Unit price |
|---|---|
| To 4 |
€175.00*
|
| To 9 |
€166.25*
|
| To 24 |
€157.50*
|
| From 25 |
€149.00*
|
Currently not available (delivery time on request)
| Product number: | 202613 |
|---|---|
| Manufacturer number: | UT622A |
| EAN | 6935750562215 |
Are you a reseller, need a large quantity or have a price target?
Apply for a reseller / high volume account to get access to our wholesale conditions. You can also contact our sales team at any time via info@schwick.de or +49 2191 598 280
UNI-T UT622A LCR Meter Beschreibung
The UT622A is a high performance, portable component (LCR) meter capable of measuring inductors, resistors and capacitors and their secondary characteristics (D (dissipation factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in radians) and ESR (equivalent series or parallel resistance)). The parameters of the components are measured by AC voltage with a selectable frequency of 100, 120, 1000, 10000 Hz and a selectable amplitude of 0.1 Vrms, 0.3 Vrms, 1.0 Vrms at the output impedance of the signal source 100Ω. Here, the highest measurement accuracy is 0.1%. On the 2.8-inch TFT LCD display of the device, all measurements can be displayed accurately.
In summary, the UT622A is perfectly suited for professional users who are looking for a high-quality and accurate LCR meter (component tester).
The UT622A complies with all EU safety standards.
UNI-T UT622A LCR Meter Features
- manual LCR meter for primary and secondary parameters of components
- automatic component identification
- measurement with AC voltage 100, 120, 1000 or 10000 Hz
- large backlit TFT LCD display with 10 brightness levels
- display range is maximum 99999 counts
- maximum accuracy 0.1
- possibility to select components according to given tolerances
- selectable amplitude measuring voltage 0.1 Vrms, 0.3 Vrms, 1.0 Vrms
- equivalent mode selection (for Z <100Ω serial, for Z < 10kΩ parallel)
- mini-USB interface for data transfer to PC / charging the device
- built-in high capacity battery: 1800 mAh
- power supply: rechargeable battery or AC adapter
- running time with one battery charge: approx. 8 hours
- functions in recording mode and data statistics: AVG (average), MAX, MIN
- automatic power off: yes after 5, 15, 30, 60 minutes
- audible and visual alarm for comparison of tolerance results
- reset open circuit or short circuit tester: yes
- tolerance value setting from nominal: 1% to 20%, default 5%.
- component counting: all, compliant, non-compliant
- scope of delivery: UT622A device, USB interface cable, UTR-002 two-pole test cables with alligator clips, software for PC (CD), UTR-001 gold-plated short-circuit board
UNI-T UT622A LCR Meter Technical Data
|
Model |
UT622A |
UT622C |
UT622E |
|
Test frequency |
100Hz, 120Hz, 1kHz, 10kHz |
100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
|
Test signal level |
0.1Vrms, 0.3Vrms, 1Vrms |
||
|
Output impedance |
100Ω |
||
|
Measurement parameters |
Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR |
|
|
Auto LCR |
√ |
||
|
Test terminals |
Three-terminal test jacks, five-terminal test sockets |
||
|
Test rate |
Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
||
|
DCR test rate |
-- |
-- |
Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
|
Ranging mode |
Auto/hold |
||
|
Tolerance range |
1%~20% |
||
|
Testing circuit mode |
Series/parallel mode |
||
|
Clearing correction |
Open/short circuit |
||
|
Fuse of test ports |
0.1A/250V |
||
|
Communication interface |
Mini-USB |
||
|
LED alarm for tolerance |
√ |
√ |
√ |
|
Display range |
|||
|
Maximum reading of primary parameters |
99999 |
||
|
Minimum resolution |
0.0001 |
||
|
Maximum accuracy |
0.1% |
||
|
L |
0.00μH~99.999H |
||
|
C |
0.00pF~99.999mF |
||
|
Z/R |
0.0000Ω~9.9999MΩ |
||
|
ESR |
0.0000Ω~999.99Ω |
||
|
D |
0.0000~9.9999 |
||
|
Q |
0.0000~99999 |
||
|
θ |
-179.9°~179.9° |
||
|
DCR |
---- |
0.01mΩ--20.000MΩ |
|
|
Temperature coefficient |
0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) |
||
|
General specifications |
|||
|
Battery |
3.7V 1800mAh lithium polymer battery |
||
|
Battery life |
8 hours |
||
|
AC power adapter |
Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A |
||
|
LCD |
2.8 inches TFT LCD 320X240 |
||
|
Product size (W×H×D) |
93mm×192mm×44mm |
||
|
Weight |
420g |
||
| Product number: | 202613 |
|---|
Company Name
Uni-Trend Technology (China) Co., Ltd.
Address
No.6, Gong Ye Bei 1st Road, Songshan Lake National High-Tech Industrial Development Zone,
Dongguan City, Guangdong Province, 523 808, CN
Phone
(86-769)85723888
Company Name
P+C Schwick GmbH
Address
Bergisch Born 87A, Remscheid, NRW, 42897, DE
E-Mail
info@schwick.de
Phone
02191598280
- Caution: Not suitable for children under 3 years.
- Caution: Keep out of reach of children.
- Use only under direct adult supervision.